View Full-Size Image

Exceeds MQSA/ACR Recommendations!!

The MAMMO-TECHLINE is a family of dedicated Mammography illuminators designed to create an effective, comfortable reading environment for Mammography interpretation. Its unique design incorporates an internal shutter providing the flexibility of reading both 18 x 24cm and 24 x 30cm Mammography film formats. All MAMMO-TECHLINE configurations feature the internal shutter as a STANDARD feature and are offered in several configurations as described below.

The unique MAMMO-TECHLINE design is available in double tier and single tier configurations.

The two-tier MAMMO-TECHLINE viewing surfaces providing an optimal environment for diagnostic comparison of Base Line and Current Mammograms. The unit is capable to be mounted as follows:

• can be configured for desk top mounting which features a vertical top viewing surface and a bottom viewing surface angled out at 20 degrees. This creates the ideal conditions for seated Mammographic viewing. (227114)

• can be surface wall mounted featuring two MAMMO-TECHLINE viewing surfaces positioned vertically on top of one another. This mounting configuration is ideally suited for facilities with minimal counter or desk space. (227113)

The single-tier MAMMO-TECHLINE viewing surface. This configuration is best suited for environments where only one set of Mammograms are viewed at a time. For example, a Technologist area, patient consultation area or a screening facility.
Wallmount-(227103)
Desktop Mount/20° Angulation-(227104)

All two tier MAMMO-TECHLINE configurations are designed to provide a minimal separation between upper and lower viewing areas thus enabling the reader to comfortably compare images with minimal eyeshift and distraction.

The MAMMO-TECHLINE viewing surfaces are specifically tailored to the mammographic film sizes to eliminate harmful extraneous light from shining in the reader’s eyes.

Wall Mount Cat No. 227113	Desk Mount Cat No. 227114 with bottom 20° angle

Wall Mount Cat No. 227103	Desk Mount Cat No. 227104 with 20° angle

SPECIFICATIONS:
Switches: Two position rocker type
Electrical: 110-124V,60Hz .93 AMPS per tier
Lamps: Three G.E. #F30T12D
Luminance Level: 5750NIT
Construction: Welded steel
Ballasts: Thermally protected, low leakage, Rapid-start. No external starter. UL/CSA listed.
Grounded Chassis: 3 wire, 7 ft. cord NEMA5-15P. 2 pole, 3 wire ground plug.
Finish: Hospital white enamel.

*Wall Mount    **Desktop Mount    †Brackets included for wall mount or desktop mount