View Full-Size Image

BODY CONSTRUCTION
18 gauge welded steel construction 3 3/8" deep body. Utilizing a universal body design, the Techline series is available in any of the following light sources.

Available in any of the following light sources.
200 Series: Two F15T8/D lamps or equivalent, 500' lamberts.  Maxant 200 Series Illuminators

300 Series: Three F15T8/D lamps or equivalent, 790' lamberts.
300 Series with Dual Brightness OPTION: Three F15T8/D lamps or equivalent. All lamps must be on in HIGH (790' lamberts) and LOW (590' lamberts) modes for optimal light distribution.

400 Series: Four F15T8/D lamps or equivalent, 820' lamberts. Maxant 400 Series Illuminators

400 Series with Dual Brightness OPTION: Four F15T8/D lamps or equivalent. All lamps must be on HIGH (820' lamberts) and LOW (500' lamberts) modes for optimal light distribution.

Film Grip: Roller gravity film holding system accommodates all film thickness variations. Will not scratch or tear film.

Continuous Bottom Film Ledge: Allows for the placement of small formats on the top and bottom of viewing area.

Finish: Baked white enamel finish is chemically bonded to all metal surfaces to provide durable chip and wear resistant outer surface.

Two Tiered Design: Two tier configurations have a minimum separation between tiers of 1.8" for easy top to bottom image comparison.

Diffusing Panel: Diffusing panel is shatter resistant, U.L. listed Plexiglas MC thermoplastic.

Engineered Design For Easy Servicing: Plexiglas panel is easily removed without tools. Fixture is serviceable without having to remove fixture from wall.

ELECTRICAL:
300 Series: 110V 60 Hz, 0.66 Amps per panel

Ballasts: All ballasts are U.L. listed and C.S.A. approved rapid start, low leakage, thermally protected, Class P ballasts.

Line Cord and Plug: Each fixture has a grounded chassis with 3-wire, 7' cord and NEMA 5-15P, 2 pole, 3 wire ground.

Switches:
The standard two position rocker switch provides manual ON/OFF lighting for each viewing area.
The optional film activated switch features a three position rocker switch for manual ON/OFF or AUTO for film activated lighting for each panel.
Techline 300 Series with optional dual intensity, features a separate high/low brightness control switch for each tier.

Cluster Switching:
Individual rocker control switches are a STANDARD feature and are centrally located at the bottom of the fixture, configured in the same layout as the viewing panels they control.

OPTIONAL FEATURES
Film Activated Switch: 3 Position Rocker Switch: Provides for manual ON, OFF and film activated lighting which activates when a film is inserted into the film grip.

Master Switch: Provides master ON/OFF control of the entire fixture.

Dual Brightness Option: Provides the flexibility of either high or low illumination. All lamps are lit in the high and low modes for uniform light distribution over the entire viewing panel. One brightness control switch controls each tier.

Note: Film activated switching comes as standard with dual brightness only. Dual Brightness option is available only on Techline 300 and 400 Series.

Hospital Grade Plug: Heavy duty hospital grade plug specified in certain municipalities.

Recessed units must be hardwired.
Hardwire is optional on surface mount units.